5 Simple Steps of Basement Waterproofing

basement waterproofing NYC

Before you venture into local basement waterproofing, you should comprehend why it might be damp in the first place. Since most basements in NYC are below the ground, they are more horizontal to gather excess moisture and suffering water damage.

Melange Restoration Inc. carries premium products and professional experiences to provide basement waterproof in NYC. Depending on your level of expertise and the issues you are experiencing on your property, it may be suitable to hire professionals to handle this.

Here we are penning down simple steps as a guide for you!

Common Reasons of Wet Basement:

  • Poor drainage is a major cause of a wet basement. When flooded water not correctly directed away from your home, it will sit at the house’s basement and seep into the basement.
  • Improperly installed or blocked gutters or even sloping around your home is distressing. If your land has sloped toward your home, water will run toward and collect around your house’s basement.
  • Cracks in a house’s basement are a definite way for water to dribble in through your basement walls and floors.
  • The doors, windows, and wells of basement that aren’t secure are other ways for water leakage.

The basement is said to be the main part of any home. But as a basement of a house shifts and settles into the earth, cracks will inevitably develop and water can seep in, resulting in a wet basement.

Typically, these cracks can be fixed with simple basement waterproofing solutions. There are a few possible interior and exterior waterproofing cases where a contractor required to repair major basement damages, or a hired professional would recommend remodeling your waterproof system.

Though, here, we’ll focus on what you, as an owner, can do for interior waterproofing.

Before Starting

Before you start basement waterproofing from walls, you want to know from where your water is coming.

Sometimes the cause of your basement problems is apparent, such as detectable water striped coming down from windows, walls, or around pipes.

But if a whole concrete wall considers damp, tumble a large part, tape an open area foot piece of foil over that stain, and check for a reduction on the inside of the foil after a day.

If the foil is damp, it is likely that you have water seeping in through your basement walls. If the foil is dry, the water is beginning away, and you’ll need to inspect further.

1: Clean the Affected Area

First, you have to clean up the areas you are going to be waterproof. Many of the waterproofing methods can be used directly to the substrate. So, if there are any existing coatings on the surface, wall, or floor, they should remove.

2: Block the Holes

For any holes, use hydraulic cement to block any visible holes and large cracks. Hydraulic cement seals the cracks and holes in masonry and stops water flow through them, even under pressure.

3: Fill out the Cracks

After blocking the holes, it’s time to fill out small cracks with masonry crack filler.

4:  Seal Openings

Through caulking doors, windows, and window walls can be sealed. The elastic sealant, such as Big Stretch Sealant or Lexel Sealant, both are waterproofing substances and flexible in use.

5: Apply Waterproof Coating

After the cracks and holes sealed, use a waterproof coating on your basement exterior. Apply the concrete sealer and make sure to work it into the pores of the masonry.

Proper coverage and a minimum of two coats must required to guarantee waterproofing.

Reading all the points, one may consider handling basement waterproofing. But a professional waterproofing contractor makes this hassle simpler.

Melange Restoration Inc. waterproofing contractors presenting professional services in all major areas of NYC, such as Bronx, Brooklyn, Queens, and Manhattan. To get more updates and success stories of Melange Restoration Inc. follow our social links of Facebook, Instagram, and LinkedIn.

More Tips on Basement Waterproofing During Construction

waterproofing contractor NYC

Whether you want to construct your residential or commercial building, you will have to open the doors of your chest box in which you keep your years of savings.

Apart from the construction expenses, you will also need time and energy to keep your eyes on workers to make sure that the tasks are being done as required or not.

Basement waterproofing is a vital part of the construction. Even if your basement has never experienced a water increase, there’s always remains a chance that it will. That area of the building is horizontal to constant dampness and flooding.

Water can get in through cracks in the basement windows, base, or walls, causing problems such as damaged carpets or floor, musty odors, and shape.

Who wants to face problems like a wet basement, growth of yeast on exterior walls, and roof leakage, etc.?

No one!

Everyone wants to be away from such a worst construction problem. If you also wanted to be away from it, you have to consider and follow the following tips of basement waterproofing during construction.

In this blog, you will learn useful tips and tricks that you can adopt for waterproofing during constructions.

Tips for Basement Waterproofing

Although water damage recovery and basement repair should be hand over to waterproofing contractors, there are various waterproofing techniques the experts can use and control to stop basement flooding and decrease the risk that comes along with dampness.

Make use of these basement waterproofing tips to keep the area dehydrated and comfortable:

Pick Waterproof Carpeting Materials

A wrapped facade can dampen if your basement has water problems. Auspiciously, there are steps you can take to protect them from holes and standing water.

If you have discovered floors, a waterproof layer could be a wise choice if your basement has flooded previously or has mold and mold problems.

Apply Sealant to Walls and Floor for Basement Waterproofing

Cracks can, at times, be seen in concrete or cemented walls. These cracks permit water to leak in from the outside.

First of all, inspect the paint. If it is peeling, go over to inspect if there are any cracks under that are leasing the dampness in.

Before waterproofing the basement walls, clean and prep the surface to eliminate any dump. Apply a fine layer of waterproof sealant and let it dry completely before re-painting.

Keep Wood Surfaces and Water Separate

Dry decay can be found in damp areas that fix with wooden surfaces and structures, particularly floorboards and support beams. Consider separating the wood from the surface around the basement to reduce the danger of dry decay.

Use Dehumidifier

If your basement waterproofing work leads you toward mold and yeast cleaning, that is foul-smelling work. A dehumidifier component will be your rescuer. Dehumidifiers persuade dampness out of the air before it can destroy walls, paint, and fixtures.

Explore the Outdoor water damage problems

Even though style, paint peeling, and dry decay may show internally. External elements are numerous that lead to the problem.

For basement waterproofing, make sure to test drains and gutters for dribbles, which can cause water to stream toward the premises.

The compensation of waterproofing is more than just repairs and damage fixes, waterproofing can provide you with composure.

If you are having constant problems, there could be a range of reasons that are still out of your control.

Controlling these basement waterproofing problems takes professional tools and experience, so it is best to connect with professional for service or advice.

Melange Restoration Inc. is a licensed waterproofing contractor in NYC. Our team members have the proper certifications to take care of any job safely and thoroughly. As the well-known general contractor company in NYC, our goal is to get your home back to its pre-damage state, which helps to increase its resale value and appeal and allows you to move forward without hassle or worries. Explore our latest project updates and follow us on Facebook and Instagram.

, ,

Options to Retain and Repair the Building Basement Waterproofing

hire waterproofing contractors in nyc

hire waterproofing contractors in nyc

When you have basement moisture problems, there are some useful options to deal with them.

You could grub up the storage area around your building basement waterproofing and apply a moisture wall to keep water from inflowing immediately.

But, this is a huge and costly project that is not possible for most of the home-owners in NYC.

You could also use basement waterproofing and sealing materials to the inner walls. Though, this won’t proceed more than a decade before water starts seeping through all over again.

The second option is to set up French sap and a weeping hole to direct that excess water out of the basement using the sump pump.

This procedure can work inside in a moderately short period but remains with capable, long-lasting results.

Building Basement Repair Options

Here’s how it’s done:

  • A 12-inch width section of the concrete floor around the perimeter of the basement  removed.
  • A trench dug into the ground underneath to provide room for the drain.
  • Drainage holes drilled into the foundation walls below floor level.
  • A layer of gravel spread over the exposed ground.
  • A perforated metal drainage pipe or flat, wide tube placed on the gravel.
  • More gravel placed on top of the metal tube.
  • A layer of concrete can be reapplied over this to restore the floor.
  • Basement crack repair performed to restore the walls.

The French drain will collect all of the water that comes out of the weeping holes and direct it towards your sump pump.

If your foundation is in need of some, consult Melange Restoration Inc. in New York City for the best basement waterproofing services and solutions.

As Melange Restoration Inc. is one of the leading waterproofing companies in NYC, we can help with basement waterproofing and repairing now to stop moisture and cracking in the future. Give us a call or fill out our online contact form to get started with a free quote right away.